Navigation

Energy Efficiency

Module Chairperson: Dragan Mihic, PhD

Rules for selecting courses:

Students need to take minimum 3 subjects from group A.1.

Students can select maximum 2 subjects from groups A.2 and A.3, one if which can be replaced by two practicums from group A.4, or with one practicum from group A.4 and one project from group A.5.

Since 2017/18, one subject from groups A2 or A3 can be replaced by a subject from any other module with the consent of the module chairperson.

Students can select maximum 2 subjects taught by the same lecturer. Students who graduated from the Department of Power Engineering, the School of Electrical Engineering, Belgrade University, can write their master thesis only from the specific subject area which they studied in courses from group A.1, A.2 and A.3, as well as areas from bachelor studies from which they could write the final paper. Other students can write their master dissertations only in subjects they passed from group A.1, A.2 and A.3.

 

Group A.1
New code Subject Number of lessons ECTS Credits
1st semester
13M011EEP Energy-efficient electromotor drives 3+1+0 6
13M011DP2 Digital control of power converters and drives 2 2+1+1 6
13M011EIPZ Electrical installations of smart buildings 6) 3+1+0,5 6
2nd semester
13M011SSP Synchronous servomotors with permanent magnets 3+1+0 6
13M011ESO Energy-efficient lighting systems 3+1+0 6
13M011PFN Photovoltaic system design 2+1+1 6
13M011OPE Selected chapters from electromotor drives 4) 3+2+0 6

 

Group A.2
New code Subject Number of lessons ECTS Credits
1st semester
13M011RSTP Computer simulation of thermal processes in power engineering5) 3+1+0 6
2nd semester
13M011LVE Laboratory exercises in power converters and drives (selection of 2 blocks of exercises) 3+0+1 6
13M011EAE Power engineering aspects of energy efficiency of buildings 6) 3+1+0 6

 

Group A.3
Subjects of the Department of Power Converters and Drives
New code Subject Odd-numbered or even-numbered semester Number of lessons ECTS Credits
13M011ELO Electric lighting O 2+2+0 6
13M011EI2 Low-voltage electric installations 2 O 2+2+0,5 6
13M011VMP Multi-motor drives E 2+2+0 6
13M011REP Regulation of electromotor drives O 2+1,5+0,5 6
13M011EP2 Power converters 2 E 2+2+0,5 6
13M011UEP Control of power converters 5) O 2+1+1 6
13E013DPP Digital control of power converters and drives E 2+1+1 6
13M011EVO Electric vehicles O 2,5+1+1,5 6
13M011ZZE Heating and protection of electric machines 3) O 3+1+0 6
13M011IEM Electric machine testing E 2+0+2 6
13M011EMJS Direct-current machines O 2+1+1 6
13M011SEI Special electric installations E 2+1+1 6
13M011EFT Energy-efficient electrothermal processes E 2+1+1 6
13M011PKO Converter circuits for renewable energy sources E 2+2+0 6
13M011SAE Software tools in power engineering 1) O 2+2+0 6
13M011OPI General engineering 2) E 2+2+0 6

1) The subject has not been offered since 2016/17.

2) The subject was not offered in 2017/18.

3) The subject was not offered in 2017/18, and in 2018/19 it was moved from the second to the first semester and can be selected again. 

4) The subject is offered in 2018/19.

5) The subject is not offered in 2018/19.

6) The subject is offered from 2019/20 onwards.

Group A.4
Practicums of the Department of Power Converters and Drives
New code Practicum Odd-numbered or even-numbered semester Number of lessons ECTS Credits
13E014PEP Practicum in electromotor drives O 0+0+2 3
13E014PREP Practicum in regulation of electromotor drives E 0+0+2 3
13E013PDS Practicum in digital signal processors O 0+0+2 3

 

Group A.5
Projects of the Department of Power Converters and Drives
New code Project Odd-numbered or even-numbered semester Number of lessons ECTS Credits
13M011PRET Project in energy transformers O 0+0+2 3
13M011PREI Project in electric installations O 0+0+2 3
13M011PRPE Project in electromotor drives O 0+0+2 3
13M011PRSM Project in synchronous machines O 0+0+2 3
13M011PREN Project in power drives O 0+0+2 3
13M011PRUP Project in digital control of converters and drives  O 0+0+2 3

 

Subjects from group A.3 cannot be selected if the student already passed the same subject in the bachelor programme.

Subject Master studies code Bachelor studies code
Electric lighting 13M011ELO 13E013ELO
Low-voltage electric installations 2 13M011EI2 13E013EI2
Multi-motor drives 13M011VMP 13E013VMP
Regulation of electromotor drives 13M011REP 13E013REP
Power converters 2 13M011EP2 13E013EP2
Control of power converters 13M011UEP 13E013UEP
Digital control of power converters and drives 13E013DPP 13E013GDPP
Electric vehicles 13M011EVO 13E013EVO
Heating and protection of electric machines 13M011ZZE 13E013ZZE
Electric machine testing 13M011IEM 13E013IEM
Direct-current machines 13M011EMJS 13E013EMJS
Special electric installations 13M011SEI 13E013SEI
Energy-efficient electrothermal processes 13M011EFT 13E013EFT
Converter circuits for renewable energy sources 13M011PKO 13E013PKO
Software tools in power engineering 13M011SAE 13E013SAE
General engineering 13M011OPI 13E013OPI

 

Practicums from group A.4 cannot be selected if the student already passed the same practicum in the bachelor programme.

Subject Master studies code Bachelor studies code
Practicum in power drives 13E014PEP 13E014PEP
Practicum in regulation of power drives 13E014PREP 13E014PREP
Practicum in digital signal processors 13E014PDS 13E014PDS

 

Projects from group A.5 cannot be selected if the student already completed the same project in the bachelor programme.

Subject Master studies code Bachelor studies code
Project in energy tranformers 13M011PRET 13E014PRET
Project in electric installations 13M011PREI 13E014PREI
Project in electromotor drives 13M011PRPE 13E014PRPE
Project in synchronous machines 13M011PRSM 13E014PRSM
Project in energy converters 13M011PREN 13E014PREN
Project in digital control of energy converters 13M011PRUP 13E014PRUP